If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

FEDERAL GOVERNMENT OF NIGERIA

FEDERAL MINISTRY OF POWER

RE: INVITATION TO TENDER FOR CONSULTANCY SERVICES FOR PROJECT

MANAGEMENT AND SUPERVISION OF THE CONSTRUCTION OF 215MW

LPFO/GAS-FIRED POWER PLANT IN KADUNA STATE

The Federal Government of Nigeria through the Federal Ministry of Power has awarded Turnkey Contracts for the construction of 21 5MW (ISO) LPFO/Gas fired power plant in Kaduna State, Nigeria. This is part of government’s strategy to improve power supply across the country. Accordingly, the Federal Ministry of Power in October 2009 placed “invitation to tender” adverts in national publications to engage competent firms to provide consultancy services for effective management and supervision of the construction of this power project.

Revisions to the Request for Proposals (RFPs) originally issued for the tendering process have necessitated this new publication. Reputable consulting firms with proven track record are hereby invited to tender for the consultancy services. Bidders who had earlier submitted their proposals based on the earlier RFP may wish to retrieve their proposals and re-tender. The project and consultancy services are to be funded out of Federal Government’s allocation for the power sector

Project Information

The project consists of Engineering, Procurement, Construction (EPC), and Commissioning of turnkey dual-fired (LPFO/natural gas) pre-packaged and factory pretested 8 x 26.13MW power plant and interconnection to existing double circuit 132kV switchyard in Kaduna State, Nigeria, Project completion period is 21 months.

Scope of Work

The consulting firm is expected to manage and supervise the construction of the power plants to ensure timely execution and in accordance with the specifications of the EPC contract. The services include:

i) development of a project management manual for the project to be managed and supervised;

ii) project coordination, management and supervision;

iii) technical control of design and engineering;

iv) oversee receipt and delivery of equipment to site;

v) works execution monitoring at site; and

vi) oversee commissioning and testing upon works completed. Duration of assignment is 24 months.

Conditions for Tendering

Interested Consulting Firms are expected to submit a technical and financial proposal based on the revised RFP to be issued. Only the proposals of firms that meet the following pre-qualification conditions will be evaluated:

· Company profile with copy of Certificate of Incorporation, Article of Association, Memorandum of Understanding & Company’s Registration with professional bodies particularly COREN or equivalent;

· Evidence of managing and supervising a major engineering project of over $100 million within the past five (5) years;

· Curriculum Vitae of individual consultants/staff who will be assigned to the required service (s), including relevant qualification and individual experience in handling similar assignments; and

· Submission of three (3) years tax clearance.

Quality and Cost Based Selection method will be used in accordance with the procedures set out in the Public Procurement Act 2007: Public Procurement Regulations for Consulting Services. (Act No, 14 of 2007) at www.bpp.gov.nq. Evaluation criteria for both technical and financial proposals are contained in the RFP. The RFPs can be picked up from the office of the Secretary, Ministerial Tenders Board or request for the RFP by email to wyunusa@vahoo.com. sgarba@gmail.com. Clarifications and further information may be sought through these email addresses or on the following numbers: (+234) 8023050904, 803-314-0575from 8,00AM to 5.00PM, Mondays through Fridays (except public holidays).

Submission Of Proposal

Six (6) copies and one CD-ROM of each completed technical and financial proposals should be submitted in two (2) separate envelope enclosed in a 3rd sealed envelope dearly marked “Project Consultancy Services for 215MW LPFO/Gas Power project” Six (6) copies of the pre qualification requirements in another envelop should be clearly marked “Pre-qualification document for Kaduna Power Project” at the top right-hand corner. These tender documents should be addressed and delivered to:

The Secretary

Ministerial Tenders Board

Federal Ministry of Power, Federal Secretariat Complex, Phase I,

Annex III, 3rd Floor, Room 347 CBD

Abuja, Nigeria

Submission on or before 1^st February, 2010 delivered not later than 5.00PM Nigerian time.

Signed:

I.B Sali-

Permanent Secretary

Federal Ministry of Power

ABUJA · CAC · Construction · Consultancy · Consultants · DeSign · Equipment · Evaluation · Government · Kaduna · Management · Monitoring · Project · Supervision

FEDERAL GOVERNMENT OF NIGERIA

FEDERAL MINISTRY OF POWER

RE: INVITATION TO TENDER FOR CONSULTANCY SERVICES FOR PROJECT MANAGEMENT AND SUPERVISION OF THE CONSTRUCTION OF 10MW WIND

FARM POWER PLANT IN KATSINA STATE

The Federal Government of Nigeria through the Federal Ministry of Power has awarded Turnkey Contracts for the construction of IOMW Wind Farm power plant in Katsina State, Nigeria. This is part of governments strategy to improve power supply across the country, Accordingly, the Federal Ministry of Power in October 2009 placed “invitation to tender” adverts in international and national publications to engage competent firms to provide consultancy services for effective management and supervision of the construction of this power project

Revisions to the Request for Proposals (RFPs) originally issued for the tendering process have necessitated this new publication. Reputable consulting firms with proven track record are hereby invited to tender for the consultancy services. Bidders who had earlier submitted their proposals based on the earlier RFP may wish to retrieve their proposals and re-tender. The project and consultancy services are to be funded out of Federal Government’s

PROJECT IN FORMATION

The wind farm will be located at Lamba-rimi, Katsina State, Nigeria The site is considered as a remote area with flat terrain. Core parameters for the project include WTG technology type 37 GEVMP (275kW), 37 turbines, rotor diameter (32m), hub height (55m) and capacity is 10.175MW. Project completion period is 21 months.

SCOPE OF WORK

The consulting firm is expected to manage and supervise the construction of the power plants to ensure timely execution and in accordance with the specifications of the EPC contract. The services include:

i) development of a project management manual for the project to be managed and supervised;

ii) project coordination, management and supervision;

iii) technical control of design and engineering;

iv) oversee receipt and delivery of equipment to site;

v) works execution monitoring at site; and

vi) Oversee commissioning and testing upon works completed. Duration of assignment is 24 months.

Conditions for Tendering

Interested Consulting Firms are expected to submit a technical and financial proposal based on the revised RFP to be issued. Only the proposals of firms that meet the .following prequalification conditions will be evaluated:

· Company profile with copy of Certificate of Incorporation. Article of Association, memorandum of Understanding & Company’s Registration with professional bodies particularly COREN or equivalent;

· Evidence of managing and supervising a major engineering project of over $25 million within the past five (5) years;

· Curriculum Vitae of individual consultants/staff who will be assigned to the required service(s), including relevant qualification and individual experience in handling similar assignments; and Submission of three (3) years tax clearance.

Quality and Cost Based Selection method will be used in accordance with the procedures set out in the Public Procurement Act 2007: Public Procurement Regulations for Consulting Services, (Act No. 14 of 2007) at www.bpp,gov.ng Evaluation criteria for both technical and financial proposals are contained in the RFP The RFPs can be picked up from the office of the Secretary, Ministerial Tenders Board or request for the RFP by email to wyunusa@yahoo.com. sgarba@gmail.com. Clarifications and further information may be sought through these email addresses or on the following numbers: (+234) 8023050904, 803-314-0575 from 8.00AM to 5,00PM, Mondays through Fridays (except public holidays).

Submission of Proposal

Six (6) copies and one CD-ROM of each completed technical and financial proposals should be submitted in two (2) separate envelope enclosed in a 3rd sealed envelope clearly marked “Project Consultancy Services for 10MW Wind farm power plant” at the top right-hand comer. Six (6) copies of the pre qualification requirements in another envelop clearly marked “pre-qualification document for Katsina Power Project” at the top right-hand corner These tender documents should be addressed and delivered to:

The Secretary

Ministerial Tenders Board

Federal Ministry of Power, Federal Secretariat Complex, Phase I,

Annex III, 3rd Floor, Room 347 CBD

Abuja, Nigeria

Submission on or before 1^st February, 2010 delivered not later than 5.00PM Nigerian time.

Signed:

I.B Sali-

Permanent Secretary

Federal Ministry of Power

ABUJA · CAC · Construction · Consultancy · Consultants · Equipment · Evaluation · Government · Governments · Katsina · Management · Monitoring · Project · Supervision

INTEGRATED DATA SERVICE LIMITED

(A SUBSIDIARY OF NIGERIAN NATIONAL PETROLEUM CORPORATION)

PREQUALIFICATION FOR THE EXPANSION OF DATA STORAGE FACILITIES AT IDSL, BENIN OFFICE COMPLEX

INTRODUCTION

The INTEGRATED DATA SERVICE LIMITED (A subsidiary of NNPC) intends to expand its Data Storage facilities in our Benin office complex. Submission for Prequalification are therefore, invited from reputable companies having the experience and capability to undertake the scope of work defined below.

SCOPE OF WORK

The supply and installation of a Mobile Aisle System the carriage and drive system are available as Mechanically-Assisted or Computerized and must include state of the art safety features,

The Mobile Aisle System should fit into a floor space measuring a Total 663 square Feet (width 13ft X length 51ft) with a storage capacity of 10,000 cartridges (3490/3590).

Training of Personnel (on both usage and maintenance of the Mobile Aisle System).

PRE-QUAUFICATI0N REQUIREMENTS

· Evidence of incorporation Registrations with Corporate Affairs Commission

· Evidence of valid Registrations with Department of Petroleum Resources

· Evidence or valid Registration with NNPC or IDSL.

· Evidence of Certified audited accounts for last three (3) years

· Evidence of similar job experiences within the last five (5) years including names of clients, locations, dates, contract value and references on the jobs.

· Provide safety statistics and HSE, manual as well as training record for the HSE local person for last three (3) years

· Provide Company profile and organizational chart showing management structure with names, positions and resume of key personnel.

· Location and Contract details in Nigeria for procurement coordination.

PRE-QUALIFICATION DOCUMENT

Companies that wish to be included in the list of tenderers should submit a set of all the requested information in this advert at the following address on or before 29^th December by 3.00pm. Late entries will not be accepted.

Secretary, Management Tenders Committee

Integrated Data Services limited (Sub of NNPC)

36, Ogba Road Oko, P.M.B 1003 CD300001,

Benin City, Edo State, Nigeria.

PLEASE NOTE

The subject Prequalification documents shall be submitted in a sealed envelope clearly marked “New Cartridge Racks Project”

For further clarifications, contractors are advised to visit IDSL office at the address indicated above

IDSL reserves the right to send the tender documents only to qualified bidders

All expenses incurred in the preparation and submission of any response to this invitation shall be borne solely by the interested company.

This advertisement is not an invitation to tender for the above contract and there is no commitment or obligation implied or otherwise for IDSL to issue a tender

All previous bidders are advised to participate in view of its re-scoping.

SIGNED

MANAGEMENT

Benin · CAC · Companies · Contractors · Installation · Management · NNPC · Project · Road

FEDERAL CAPITAL TERRITORY FADAMA III COMPONENT IV OFFICE, FCT-ADP, BLOCK 601 & 602, GWAGWALADA, FCT

THIRD NATIONAL FADAMA DEVELOPMENT PROJECT CREDIT NO: 44940 UNI

INVITATION FOR EXPRESSION OF INTEREST ON ADVISORY

SERVICES ACTIVITIES

The Federal Government of Nigeria has received a credit from the International Development Association (IDA) towards the cost of implementation of the 3rd National Fadama Development Project (NFDP-III). Part of the credit has been on-lent to the Federal Capital Territory Administration (FCTA) who intends to apply part of the proceeds to eligible payment for contracts to be awarded for Advisory Services Activities (ASAs) in the 19 Fadama Development Areas of FCT.

The Advisory Services requirement in Fadama communities shall include (but not limited to) the following areas:

· Agricultural Technologies and Facilitation Skills,

· Cultivation methods,

· Participatory methodologies and facilitation skills,

· Marketing and enterprise management.

· Improved cultural practices, Soil fertility management.

· Sound use of agro-chemicals Soil conservation practices, Agro-forestry

· Rational water management and sustainable pasture management as well as sustainable Ecosystem Management.

· Inputs and Extension Service Providers;

· Adaptive Research Technology Development and Transfer Support

· Agro-Processing and storage technologies

· Fisheries technology.

· Agro business

· Livestock production and management

The selection of Advisory Service Providers (ASPs) for the Project will be carried out by the FCT Agricultural Development Project and only selected ASPs may bid for Advisory Services Activities contracts under the Project in the Fadama Communities.

The FCT Fadama III Component IV Office now invites sealed “Expression of Interest” from interested firms. Persons, NGOs or Public Agencies. The Expression of Interest” is required to state clearly the field of interest and the qualification for such role(s), attaching photocopies of documentary evidences. Prospective ASPs may be required to show original copies of submitted documents in the selection process.

Interested firms, persons, NGOs or public agencies should submit their Expression of Interest in sealed envelops marked ‘Expression of Interest for Advisory Service Activities’ to the Director, at the address below on or before 11^th January, 2010 between the hours of 8.00am – 4.00pm. Monday -Friday.

FCT Fadama III Component IV Office

FCT Agricultural Development Project (FCT-ADP)

PMB 165. Garki-Abuja,

Blocks 601 & 602, Phase I,

Gwagwalada, Abuja.

ABUJA · CAC · FCT · Fisheries · Government · Livestock · Management · Project · Water

 

 POWER HOLDING COMPAN OF NIGERIA PLC

BENIN ELECTRICITY DISTRIBUTION COMPANY PHCN

INVITATION FOR PRE-QUALIF1CATION OF CONTRACTORS/SUPPLIERS/ SUPPLIERS/MANUFACTURERS FOR 2010 CAPITAL BUDGET

  

The management of Power Holding Company of Nigeria Benin Electricity Distribution Company intends to execute some essential Federal Government of Nigeria funded capital electric power projects for 2010 financial year.

 

Interested, competent and reliable manufacturers/ contractors/suppliers are therefore invited to express their intention for supplies or project execution through submission of pre-qualification documents.

 

2.0       SCOPE OF WORK

LOT 1A:         Supply of 8.4km of HT Cables -33kv 240mm2 X1-Cores, 11kv-150Mm² X 3-Core and 35mm2 x 1- core XLPE, 300mm2 x 1- Core.

LOT IB;          Supply of IKM of L.T. Cables (For Nigerian Manufacturers only),

LOT 1C;          Supply of 160No, Terminating and Jointing Kits (Underground HT and LT Cables)

LPT2:               CONSTRUCTION OF 33KV AND 11KV OVERHEAD LINES ASSOCIATED WITH INJECTION SUBSTATIONS.

 

<span style=”font-s

Companies · Construction · Contractors · Edo · Electricity · Equipment · Government · Installation · Management · PHCN · Project · Projects · Suppliers · VAT